CellVessel 3,2 liter standard SUB

Easy to order and use standard SUB product for batch process

Most popular size of CerCell's Single-Use-Bioreactor's (SUB's) for electrical blanket thermal control. Outside dimension (OD) 137 x 270 mm = 3.2 liter Vessel Volume (VV) in one-piece rigid USP class-6 PC. Available in many different standard models. Standard product which do not require specialized help from CerCell. 

Features:

  • Available with Head-Plate-Drive (HPD) or Magnetic-Bottom-Drive (MBD)
  • 5 sensor PG 13.5 ports / no sensors installed 
  • 3 extra PG 13.5 ports / installed with Single-Use-Sensors (SUS) classical signal pH FermProbe and VisiWell DO for VisiFerm (ask for the PolarWell for ampherometric DO sensor)
  • One kidney impeller on stainless steel shaft for HPD or combined with the Aero motor for MST drive
  • 3 x 0.5 mm drilled macro sparger (max sparge gas pressure 500 mBar)
  • 3 x 10 mm wide baffels (or we leave them out)
  • Large diameter deep tube with CPC connector for perfusion purpose
  • 2 x sterile filter 26 cm2 on exhaust
  • 12 small diameter 600 mm long hoses for various inlet and outlet length 600 mm
  • Working Volume (WV): 300 ml required to cover the ceramics bearing, 500 ml will cover sensors, 1,000 ml will cover the impeller
  • Find more around thermal control on this link

MST part numbers to choose from:

  1. Magnetic-Stirrer-Table including Biostat type adaptor (ID39-B)
  2. Magnetic-Stirrer-Table including Applikon style adaptor (ID25-A)

Servo motor adapter kit available for Kollmorgen (Sartorius), 4-pin Applikon style, MagMotor (Eppendorf), Teknic (Finesse) or any other servo motor you may have. For extra security select one Off-gas Sterile-Filter-Heater envelope.

Baffles

  • Three baffles of width 10 mm x thickness 4 mm, Extend from head plate down to 0.5 liter, 43 mm from the bottom, approximate clearance between SUB wall and baffle is 4.5 mm, improves the radial mixing.

Agitation

  • Kidney impeller, OD 60 mm, 3 blades, 45 degrees clock wise rotation and up flow
  • Impeller mounted 50 mm from the bottom

Check out variants and a few standard products under Commerce

Here some customized examples

Photo above shows a cylindrical stator surrounding the impeller, offer lower RPM and simultaneously better and axial mixing and hereby less gradients, good for shear sensitive cell lines. Center photo show foam collector bottle.